Leviton Decora Smart Z-Wave Dimmers have the ability to alter the fade on and fade off rate.
To change the Fade On Time:
- Enter Programming Mode by holding the top of the paddle for 7 seconds (the Locator LED will turn amber), and then release (the Locator LED will begin to blink amber).
- Tap the top of the paddle 6 times. The Locator LED will quickly flash green and red.
- Tap the top of the paddle 1 time. The Locator LED will flash amber/red.
- Use the dim/bright bar to adjust the speed of dimming using the chart below:
To change the Fade Off Time:
- Enter Programming Mode by holding the top of the paddle for 7 seconds (the Locator LED will turn amber), and then release (the Locator LED will begin to blink amber).
- Tap the top of the paddle 6 times. The Locator LED will quickly flash green and red.
- Tap the top of the paddle 2 times. The Locator LED will flash Red.
- Use the dim/bright bar to adjust the speed of dimming using the chart below:
