Leviton Decora Smart Z-Wave Dimmers have the ability to alter the preset light level.
- Enter Programming Mode by holding the top of the paddle for 7 seconds (the Locator LED will turn amber), and then release (the Locator LED will begin to blink amber).
- Tap the top of the paddle 7 times. The Locator LED will quickly flash red and amber.
- Use the dim/bright bar to adjust the desired preset light level.
- Note: 0% or OFF disables the preset light level and will instead use the last level
- Hold the top of the paddle to exit.
- The Locator LED will quickly flash amber to confirm.